From boitboy on 2013-09-18 21:24:45
C++获取硬盘的序列号
//网上搜索了好多代码都没法用
//有些没发编译，有些编译成功了计算出来的结果为空，这份代码是可以的，但是用了很多的用不到的输出，我把输出去掉后，直接改换成了一个函数GetHardId,调用后就可以获取硬盘ID,最多只获取19个字符，用处机器码足够了
//用C++获取硬盘的序列号ID以及网卡的MAC地址的源代码，可以用此方式结合md5加密算法进行软件加密。
//获取硬盘ID信息及网卡MAC地址的代码
/*+++
HDID.CPP
Written by Lu Lin
http://lu0.126.com
2000.11.3
---*/
#include "stdafx.h"
#include "HDID.h"
#define DFP_GET_VERSION 0x00074080
#define DFP_SEND_DRIVE_COMMAND 0x0007c084
#define DFP_RECEIVE_DRIVE_DATA 0x0007c088
#pragma pack(1)
typedef struct _GETVERSIONOUTPARAMS {
BYTE bVersion; // Binary driver version.
BYTE bRevision; // Binary driver revision.
BYTE bReserved; // Not used.
BYTE bIDEDeviceMap; // Bit map of IDE devices.
DWORD fCapabilities; // Bit mask of driver capabilities.
DWORD dwReserved[4]; // For future use.
} GETVERSIONOUTPARAMS, *PGETVERSIONOUTPARAMS, *LPGETVERSIONOUTPARAMS;
typedef struct _IDEREGS {
BYTE bFeaturesReg; // Used for specifying SMART "commands".
BYTE bSectorCountReg; // IDE sector count register
BYTE bSectorNumberReg; // IDE sector number register
BYTE bCylLowReg; // IDE low order cylinder value
BYTE bCylHighReg; // IDE high order cylinder value
BYTE bDriveHeadReg; // IDE drive/head register
BYTE bCommandReg; // Actual IDE command.
BYTE bReserved; // reserved for future use. Must be zero.
} IDEREGS, *PIDEREGS, *LPIDEREGS;
typedef struct _SENDCMDINPARAMS {
DWORD cBufferSize; // Buffer size in bytes
IDEREGS irDriveRegs; // Structure with drive register values.
BYTE bDriveNumber; // Physical drive number to send
// command to (0,1,2,3).
BYTE bReserved[3]; // Reserved for future expansion.
DWORD dwReserved[4]; // For future use.
//BYTE bBuffer[1]; // Input buffer.
} SENDCMDINPARAMS, *PSENDCMDINPARAMS, *LPSENDCMDINPARAMS;
typedef struct _DRIVERSTATUS {
BYTE bDriverError; // Error code from driver,
// or 0 if no error.
BYTE bIDEStatus; // Contents of IDE Error register.
// Only valid when bDriverError
// is SMART_IDE_ERROR.
BYTE bReserved[2]; // Reserved for future expansion.
DWORD dwReserved[2]; // Reserved for future expansion.
} DRIVERSTATUS, *PDRIVERSTATUS, *LPDRIVERSTATUS;
typedef struct _SENDCMDOUTPARAMS {
DWORD cBufferSize; // Size of bBuffer in bytes
DRIVERSTATUS DriverStatus; // Driver status structure.
BYTE bBuffer[512]; // Buffer of arbitrary length
// in which to store the data read from the drive.
} SENDCMDOUTPARAMS, *PSENDCMDOUTPARAMS, *LPSENDCMDOUTPARAMS;
typedef struct _IDSECTOR {
USHORT wGenConfig;
USHORT wNumCyls;
USHORT wReserved;
USHORT wNumHeads;
USHORT wBytesPerTrack;
USHORT wBytesPerSector;
USHORT wSectorsPerTrack;
USHORT wVendorUnique[3];
CHAR sSerialNumber[20];
USHORT wBufferType;
USHORT wBufferSize;
USHORT wECCSize;
CHAR sFirmwareRev[8];
CHAR sModelNumber[40];
USHORT wMoreVendorUnique;
USHORT wDoubleWordIO;
USHORT wCapabilities;
USHORT wReserved1;
USHORT wPIOTiming;
USHORT wDMATiming;
USHORT wBS;
USHORT wNumCurrentCyls;
USHORT wNumCurrentHeads;
USHORT wNumCurrentSectorsPerTrack;
ULONG ulCurrentSectorCapacity;
USHORT wMultSectorStuff;
ULONG ulTotalAddressableSectors;
USHORT wSingleWordDMA;
USHORT wMultiWordDMA;
BYTE bReserved[128];
} IDSECTOR, *PIDSECTOR;
/*+++
Global vars
---*/
GETVERSIONOUTPARAMS vers;
SENDCMDINPARAMS in;
SENDCMDOUTPARAMS out;
HANDLE h;
DWORD i;
BYTE j;
void CopyRight()
{
//cerr<<endl<<"HDD identifier v1.0 for WIN95/98/Me/NT/2000. written by Lu Lin"<<endl;
//cerr<<"For more information, please visit Inside Programming:
http://lu0.126.com"<<endl;
//cerr<<"2000.11.3"<<endl<<endl;
}
VOID ChangeByteOrder(PCHAR szString, USHORT uscStrSize)
{
USHORT i;
CHAR temp;
for (i = 0; i < uscStrSize; i+=2)
{
temp = szString[i];
szString[i] = szString[i+1];
szString[i+1] = temp;
}
}
void DetectIDE(BYTE bIDEDeviceMap){
if (bIDEDeviceMap&1){
if (bIDEDeviceMap&16){
//cout<<"ATAPI device is attached to primary controller, drive 0."<<endl;
}else{
//cout<<"IDE device is attached to primary controller, drive 0."<<endl;
}
}
if (bIDEDeviceMap&2){
if (bIDEDeviceMap&32){
//cout<<"ATAPI device is attached to primary controller, drive 1."<<endl;
}else{
//cout<<"IDE device is attached to primary controller, drive 1."<<endl;
}
}
if (bIDEDeviceMap&4){
if (bIDEDeviceMap&64){
//cout<<"ATAPI device is attached to secondary controller, drive 0."<<endl;
}else{
//cout<<"IDE device is attached to secondary controller, drive 0."<<endl;
}
}
if (bIDEDeviceMap&8){
if (bIDEDeviceMap&128){
//cout<<"ATAPI device is attached to secondary controller, drive 1."<<endl;
}else{
//cout<<"IDE device is attached to secondary controller, drive 1."<<endl;
}
}
}
void AddToHardId(char hardId[20],const char* str,const int nSize)
{
for(int i=0;i<nSize;i++)
{
if(str[i]=='\0')
{
break;
}
if((str[i]>='0'&&str[i]<='9')||
(str[i]>='A'&&str[i]<='Z')||
(str[i]>='a'&&str[i]<='z'))
{
for(int j=0;j<19;j++)
{
if(hardId[j]=='\0')
{
hardId[j]=str[i];
break;
}
}
}
}
}
bool GetHardId_nt(char hardId[20])
{
TCHAR hd[80]={0};
PIDSECTOR phdinfo;
char s[41];
ZeroMemory(&vers,sizeof(vers));
//We start in NT/Win2000
for (j=0;j<4;j++)
{
wsprintf(hd,_T("
\\\\.\\PhysicalDrive%d"),j);
h=CreateFile(hd,GENERIC_READ|GENERIC_WRITE,
FILE_SHARE_READ|FILE_SHARE_WRITE,0,OPEN_EXISTING,0,0);
if (!h)
{
continue;
}
if (!DeviceIoControl(h,DFP_GET_VERSION,0,0,&vers,sizeof(vers),&i,0)){
CloseHandle(h);
continue;
}
//If IDE identify command not supported, fails
if (!(vers.fCapabilities&1)){
//cout<<"Error: IDE identify command not supported.";
CloseHandle(h);
return false;
}
//Identify the IDE drives
ZeroMemory(&in,sizeof(in));
ZeroMemory(&out,sizeof(out));
if (j&1){
in.irDriveRegs.bDriveHeadReg=0xb0;
}else{
in.irDriveRegs.bDriveHeadReg=0xa0;
}
if (vers.fCapabilities&(16>>j)){
//We don't detect a ATAPI device.
//cout<<"Drive "<<(int)(j+1)<<" is a ATAPI device, we don't detect it"<<endl;
continue;
}else{
in.irDriveRegs.bCommandReg=0xec;
}
in.bDriveNumber=j;
in.irDriveRegs.bSectorCountReg=1;
in.irDriveRegs.bSectorNumberReg=1;
in.cBufferSize=512;
if (!DeviceIoControl(h,DFP_RECEIVE_DRIVE_DATA,&in,sizeof(in),&out,sizeof(out),&i,0)){
//cout<<"DeviceIoControl failed:DFP_RECEIVE_DRIVE_DATA"<<endl;
CloseHandle(h);
return false;
}
phdinfo=(PIDSECTOR)out.bBuffer;
memcpy(s,phdinfo->sModelNumber,40);
s[40]=0;
ChangeByteOrder(s,40);
//cout<<endl<<"Module Number:"<<s<<endl;
memcpy(s,phdinfo->sFirmwareRev,8);
s[8]=0;
ChangeByteOrder(s,8);
//cout<<"\tFirmware rev:"<<s<<endl;
memcpy(s,phdinfo->sSerialNumber,20);
s[20]=0;
ChangeByteOrder(s,20);
AddToHardId(hardId,s,19);
//cout<<"\tSerial Number:"<<s<<endl;
//cout<<"\tCapacity:"<<phdinfo->ulTotalAddressableSectors/2/1024<<"M"<<endl<<endl;
CloseHandle(h);
}
CopyRight();
return true;
}
bool GetHardId_9x(char hardId[20])
{
ZeroMemory(&vers,sizeof(vers));
//We start in 95/98/Me
h=CreateFile(_T("
\\\\.\\Smartvsd"),0,0,0,CREATE_NEW,0,0);
if (!h)
{
return false;
}
if (!DeviceIoControl(h,DFP_GET_VERSION,0,0,&vers,sizeof(vers),&i,0))
{
CloseHandle(h);
return false;
}
//If IDE identify command not supported, fails
if (!(vers.fCapabilities&1))
{
CloseHandle(h);
return false;
}
//Display IDE drive number detected
DetectIDE(vers.bIDEDeviceMap);
//Identify the IDE drives
for (j=0;j<4;j++)
{
PIDSECTOR phdinfo;
char s[41];
ZeroMemory(&in,sizeof(in));
ZeroMemory(&out,sizeof(out));
if (j&1){
in.irDriveRegs.bDriveHeadReg=0xb0;
}else{
in.irDriveRegs.bDriveHeadReg=0xa0;
}
if (vers.fCapabilities&(16>>j)){
//We don't detect a ATAPI device.
//cout<<"Drive "<<(int)(j+1)<<" is a ATAPI device, we don't detect it"<<endl;
continue;
}else{
in.irDriveRegs.bCommandReg=0xec;
}
in.bDriveNumber=j;
in.irDriveRegs.bSectorCountReg=1;
in.irDriveRegs.bSectorNumberReg=1;
in.cBufferSize=512;
if (!DeviceIoControl(h,DFP_RECEIVE_DRIVE_DATA,&in,sizeof(in),&out,sizeof(out),&i,0))
{
//cout<<"DeviceIoControl failed:DFP_RECEIVE_DRIVE_DATA"<<endl;
CloseHandle(h);
continue;
}
phdinfo=(PIDSECTOR)out.bBuffer;
memcpy(s,phdinfo->sModelNumber,40);
s[40]=0;
ChangeByteOrder(s,40);
//cout<<endl<<"Module Number:"<<s<<endl;
memcpy(s,phdinfo->sFirmwareRev,8);
s[8]=0;
ChangeByteOrder(s,8);
//cout<<"\tFirmware rev:"<<s<<endl;
memcpy(s,phdinfo->sSerialNumber,20);
s[20]=0;
ChangeByteOrder(s,20);
AddToHardId(hardId,s,19);
}
//Close handle before quit
CloseHandle(h);
CopyRight();
return true;
}
bool GetHardId(char hardId[20])
{
OSVERSIONINFO VersionInfo;
ZeroMemory(&VersionInfo,sizeof(VersionInfo));
VersionInfo.dwOSVersionInfoSize=sizeof(VersionInfo);
GetVersionEx(&VersionInfo);
bool rc=false;
if(VersionInfo.dwPlatformId==VER_PLATFORM_WIN32_WINDOWS)
{
rc=GetHardId_9x(hardId);
}
else if(VersionInfo.dwPlatformId==VER_PLATFORM_WIN32_NT)
{
rc=GetHardId_nt(hardId);
}
else
{
return false;
}
if(rc)
{
if(hardId[19]!='\0')
{
hardId[19]='\0';
}
if(strlen(hardId)<5)
{
rc=false;
}
}
return rc;
}
/*
void main(){
char szAddr[20];
GetMacAddress(szAddr);
cout<<"\nNet adapter MAC Address:"<<szAddr<<endl<<endl;
OSVERSIONINFO VersionInfo;
ZeroMemory(&VersionInfo,sizeof(VersionInfo));
VersionInfo.dwOSVersionInfoSize=sizeof(VersionInfo);
GetVersionEx(&VersionInfo);
switch (VersionInfo.dwPlatformId){
case VER_PLATFORM_WIN32s:
cout<<"Win32s is not supported by this programm."<<endl;
break;
case VER_PLATFORM_WIN32_WINDOWS:
hdid9x();
break;
case VER_PLATFORM_WIN32_NT:
hdidnt();
break;
}
// TODO: Add your control notification handler code here
}
*/
From 123 on 2017-06-29 00:36:06
头文件呢？？
